UNI 41 Lauda

LAUDA PRO RP 240 E
Cooling heating circulator 100 V; 50/60 Hz
Features:
Thermostatic circulator with latest microprocessor technology. Integrated cooling system
Bright and high-contrast graphic OLED display
Integrated programmer, 1 programme with max. 20 segments
Operation with Cursor- and Softkeys
EasyUse system for simple operation of the whole unit
SelfCheck Assistant for system diagnosis
Command console can be detached and used as remote control
Tower design with small footprint
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal & external control
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
SmartCool system for energy-saving digital cooling management including compressor on-off control
Hybrid cooling system: (heat removal complementary with cooling water)
Utilises traditional refrigerants (HFCs) in accordance with European legislation to control F-gases (EU) 517/2014
Technical Features (according to DIN 12876):
Working temperature range: -40 ... 200 °C
Operating temperature range: -40 ... 200 °C
Ambient temperature range: 5 ... 40 °C
Temperature stability: 0.05 ± K
Heater power max.: 1.3 kW
Power consumption max.: 1.5 kW
Current max.: 15 A
Pump Pressure max.: 0,7 bar
Pump suction max.: 0,4 bar
Pump flow rate max. (pressure): 22 L/min
Pump Flow rate max. (suction): 20 L/min
In / Outlet connection thread (outside): M16 x 1
In / Outlet olives: 13 mm
Filling volume min.: 2.4 L
Filling volume max.: 4.4 L
Overall dimensions (WxDxH): 300 x 430 x 675 mm
Weight: 42 kg
Refrigerant stage 1: R-449A (GWP 1397); 0.300 kg; 0.4 t CO2-eq
Power supply: 100 V; 50/60 Hz
Power plug: Power cord with plug (NEMA 5-15P)
Cooling Capacity (Pumpenstufe):
20 °C (8); Ethanol; 0,6 kW (50 Hz); 0,6 kW (60 Hz)
10 °C (8); Ethanol; 0,6 kW (50 Hz); 0,6 kW (60 Hz)
0 °C (8); Ethanol; 0,6 kW (50 Hz); 0,6 kW (60 Hz)
-10 °C (8); Ethanol; 0,41 kW (50 Hz); 0,41 kW (60 Hz)
-20 °C (4); Ethanol; 0,24 kW (50 Hz); 0,24 kW (60 Hz)
-30 °C (4); Ethanol; 0,12 kW (50 Hz); 0,12 kW (60 Hz)
-35 °C (4); Ethanol; 0,07 kW (50 Hz); 0,07 kW (60 Hz)
-40 °C (2); Ethanol; 0,02 kW (50 Hz); 0,02 kW (60 Hz)
Standard Accessory:
2 screw caps, 2 closing plugs
2 nipples 13 mm for pump connectors
2 nipples 10 mm with screw cap G3/8 for cooling water