2 220 500 Lauda

LAUDA PRO RP 2090
Cooling heating bath thermostat 208-220 V; 60 Hz
Features:
Thermostatic bath with latest microprocessor technology. Integrated cooling system
Bright and high-contrast graphic OLED display
Operation with Cursor- and Softkeys
360° turnable and detachable control panel for remote control
EasyUse system for simple operation of the whole unit
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
SelfCheck Assistant for system diagnosis
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal & external control
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Integrated programmer, 1 programme with max. 20 segments
Low height of appliance when control panel removed
Significantly enlarged accessible volume
Bath vessel made of stainless steel (insulated, with handles and drain tap)
Internal LAUDA Varioflex pump with 8 selectable levels
SmartCool system for energy-saving digital cooling management including compressor on-off control
Hybrid cooling system: (heat removal complementary with cooling water)
Utilises traditional refrigerants (HFCs) in accordance with European legislation to control F-gases (EU) 517/2014
Technical Features (according to DIN 12876):
Working temperature range: -90 ... 200 °C
Operating temperature range: -90 ... 200 °C
Ambient temperature range: 5 ... 40 °C
Temperature stability: 0.01 ± K
Heater power max.: 2.85 kW
Power consumption max.: 2.9 kW
Current max.: 13 A
Size of bath (W x D x H): 300 x 290 x 200 mm
Bath volume min. / max.: 12.5 / 21.0 L
Overall dimensions (WxDxH): 500 x 600 x 730 mm
Refrigerant stage 1: R-404A (GWP 3922); 0.260 kg; 1.0 t CO2-eq
Refrigerant stage 2: R-170 (GWP 3); 0.080 kg; 0.0 t CO2-eq
Power supply: 208-220 V; 60 Hz
Power plug: Power cord with angled plug (BS1363)
Cooling Capacity (Pumpenstufe):
20 °C (8); Ethanol; 0,8 kW
10 °C (8); Ethanol; 0,71 kW
0 °C (8); Ethanol; 0,68 kW
-10 °C (8); Ethanol; 0,65 kW
-20 °C (4); Ethanol; 0,62 kW
-30 °C (4); Ethanol; 0,61 kW
-40 °C (4); Ethanol; 0,58 kW
-50 °C (4); Ethanol; 0,52 kW
-60 °C (4); Ethanol; 0,34 kW
-70 °C (4); Ethanol; 0,18 kW
-80 °C (4); Ethanol; 0,07 kW
-85 °C (4); Ethanol; 0,03 kW
-90 °C (4); Ethanol; 0,01 kW
Standard Accessory:
1 Bath cover
2 nipples 10 mm with screw cap G3/8 for cooling water